Skip navigation
Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorLittman, Michael G.-
dc.contributor.authorSchlafly, Caroline-
dc.description.abstractThe goal of this project is to design and build a cheap, simple, and automatic incubator for family farms. Simple incubators, while cheap, are difficult to manage because the temperature and humidity must be constantly tweaked by the user. Automatic egg incubators, while requiring almost no user input, are very expensive (about $700). This incubator is around $100, has automatic temperature control, egg turning, and status update tweets. Temperature control is achieved through an Arduino nano, which uses gains determined by the Ziegler- Nichols tuning method to turn on a solid state relay connected to a heat lamp. Egg-turning is achieved through a novel "shifting oor" design, featuring a slot mechanism attached to servo motors to shift the floor beneath the eggs. Egg-turning stops automatically at 18 days for hatch "lockdown". An ethernet shield is used to tweet status updates and warn the user if a problem occurs. Through logging data, we found that the incubator has good temperature control, egg-turning capabilities, and informative tweets.en_US
dc.format.extent37 pagesen_US
dc.titleCheap Cheep: A Low-Cost Automatic Incubator for Family Farmsen_US
dc.typePrinceton University Senior Theses-
pu.departmentMechanical and Aerospace Engineeringen_US
dc.rights.accessRightsWalk-in Access. This thesis can only be viewed on computer terminals at the <a href=>Mudd Manuscript Library</a>.-
Appears in Collections:Mechanical and Aerospace Engineering, 1924-2020

Files in This Item:
File SizeFormat 
Schlafly_Thesis13.pdf5.99 MBAdobe PDF    Request a copy

Items in Dataspace are protected by copyright, with all rights reserved, unless otherwise indicated.